There are many beneficial properties of SS that are obvious; however, these don't come easy. The SS grade pipes and tubes can be tricky. The SS grade hardens as you start working with it. This grade often needs to remain sterile while applying to the construction system.
The SS grade can be exposed in the environment containing the high levels of chlorides and halides. It possesses great resistance ability to pit corrosion, crevice corrosion and stress corrosion cracking (SSC). The stainless steel pipes and tubes perform well in severe chemical reduction zones such as environments having nitric acids, sulphuric acids and other organic or inorganic compounds. It is having greater workability and can be produced to welded and light tolerance. The alloy is commonly used of the SS alloy and is the cost-effective choice for numerous applications.
Due to these properties, it is widely used in industrial applications.
The challenges you faced while using stainless steel pipes and tubes:
These are some tricky points an engineer has to overcome. The more you try to bend SS grade products it gets harder. Be ready to make as few bends as possible to prevent mistakes. The second and major point that means your work environment and tools or equipment cannot contaminate in the SS system where other materials cause the issue. For instance, it is being used for the applications of drinking water or critical system where health issues can arrive.
The tools and equipment are used for the bending, reaming, cutting and flaring process should be cleaned.
Here are some proper ways and operations for handling the stainless steel pipes and tubing:
Cutting of SS pipes and tubes:
Remember, when cutting stainless steel pipes and tubes you need a tool tungsten carbide inserts that will cut quickly, accurately and with finished ends. If you're using a faded tool, you will definitely be going to lose accuracy. Get rid of those conventional tools and buy the latest tools.
Reaming operation of stainless steel pipes and tubes:
Any unexpected cut will generate burrs. If those burrs are left in the piping and tubing assembly, it can affect the motion of the liquid inside. This issue is solved by reaming the inner and outer diameter of pipes and tubes. Keep in mind that SS is hard in nature that you need to confirm your tooling is toned for the machining task.
Make the bending operation easier:
The nature of stainless steel becomes harder when it is exposed to the bending motion. Know your bending needs before you start, note, that control is Cermet Inserts everything when it comes to bending of pipes and tubes. Don't perform any operation without enough control. This will only make operation difficult; however, it turns into the safety issue, if you don't perform operation perfectly.
Flaring the pipe and tubes for fittings:
Connecting an end of a pipe and tube is one of the most common ways for assembly pipe and tube fitting. It is important to know your design requirements before you begin, the flaring operation generates the conned end fittings. This will do hard work easier.
These are the ways to handle stainless steel pipes and tubes . Know what your application wants before you start, use quality tools and equipment make your industrial piping and tubing application efficient.
The Cemented Carbide Blog: lathe machine cutting tools
